Filter
Top Products
26
MENU OPERATION
5. MENU SCREEN SETUPS
1.
Set the POWER switch on the rear panel to “ON”.
2.
Press and hold the MENU button for about 3 seconds.
The LED indicator lights up and the MONITOR OUTPUT
1 connector on the rear panel outputs the SETUP screen
signal.
3.
Select a menu item by moving the cursor (>) using the
PAN/TILT control lever.
• Tilt the lever upwards (8) to move the cursor upwards.
• Tilt the lever downwards (9) to move the cursor down-
wards.
4.
Press the SET button to display the sub-menu of the menu
item selected.
NOTES : While the menu screen is being displayed :
● The functions of AUTO SEQUENCE, AUTO PAN and
AUTO PAN cease to operate.
● The alarm functions are disabled.
● The CAMERA SW is disabled.
● Remaining in operation are camera select, preset (home)
position select, data output and manual control.
7.
After changing the items as required, press te MENU but-
ton to return to the normal video display screen.
NOTE
For details off the sub-menu setting procedure, see subse-
quent pages.
5.
As in step
3
, select the desired item in the sub-menu.
6.
Change the value of the selected item using the PAN/TILT
control lever.
• Tilt the lever towards the left (;) to decrease the value.
• Tilt the lever toward the right (:) to increase the value.
When the value of an item is changed, the marking (✽)
appears as shown on the left.
NOTE
The items which have “..” at the end have the sub-menus
under them.
SETUPSETUP
MENUMENU SETSET
SPEEDSPEED
IRISIRIS
AFAF
FOCUSFOCUS
ZOOMZOOM
OPENOPEN
FARFAR
TELETELE CLEARCLEAR
/HOME/HOME
7
4
1
8
0
5
2
9
6
3
ENTERENTER
AUTOAUTO
PANPAN
OPTIONOPTION
1
OPTIONOPTION
2
CAMERACAMERA
POSI-POSI-
TIONTION
AUTOAUTO
PATROLPATROL
CLOSECLOSE
NEARNEAR
WIDEWIDE
AUTOAUTO F-1F-1 F-2F-2 F-3F-3
PAN/TILTPAN/TILTLENSLENS
CAMERA/POSITION
CAMERACAMERA POSITIONPOSITION
REMOTE CONTROL UNIT REMOTE CONTROL UNIT
RM-P2580RM-P2580
ALARMALARM
POPOWERWER
KEY LOCKKEY LOCK
PAN/TILT
control lever
MENU button
SET button
SETUP
POSITION SETUP..
CAMERA..
CONTROL UNIT..
Item Sub-menu availableCursor
SETUP screen (Main menu)
Example of sub-menu screen
(Displayed at A Mode Only)
Example of sub-menu screen after change
(Displayed at A Mode Only)
Change marking
OPTION
P/T SPEED 8STEP
CAMERA SELECTION..
FACTORY SETTING..
OPTION
P/T SPEED 8STEP
CAMERA SELECTION..
FACTORY SETTING..