JVC RM-P2580 Camera Accessories User Manual


 
33
6. OTHER
TROUBLESHOOTING
Check
Is the power supply connected properly to all off the cameras?
Are the cameras connected properly to the VIDEO INPUT connectors?
Are the camera heads compatible with this unit?
Preset their home positions.
Are the cameras connected properly to the TO CAMERA connectors?
Are the DIP switches on the cameras set properly? ( REF. : Instruction
manuals of the cameras in use.)
Is the unit in the KEY LOCK status?
Are the cameras connected properly to the TO CAMERA connectors?
Are the DIP switches of the cameras set properly? ( REF. : Instruction
manuals of the cameras in use.)
Is the unit in the KEY LOCK status?
Are the camera IDs set to match correctly the VIDEO INPUT connector
numbers?
Is MAX CAMERA set to match the number of connected cameras?
Is CAMERA SELECTION set to a position other than DISABLE?
Have positions been preset?
Is P/T SPEED set as required?
Is the terminal (one of the DATA I/O terminals) where the alarm signal is
input properly set and connected?
Are items ALARM TEXT and BUZZER TIME set to NONE?
Symptom
Video is not displayed.
The cameras cannot be
initialized.
The cameras point in arbi-
trary directions after initiali-
zation.
None of the remote control
function operate.
The PAN/TILT or lens con-
trols cannot be operated
manually.
The video signal from a
camera does not appear
when the camera is se-
lected.
The camera does not
move to the position se-
lected.
The speed of camera
movement when using the
PAN/TILT control is too
slow.
Alarm operation does not
occur when an alarm sig-
nal is input.
The alarm text is not dis-
played and/or buzzer does
not sound when an alarm
signal is input.
Ref. Page
Pages 21, 22
Page 27
Pages 21, 22
Page 15
Pages 21, 22
Page 15
Page 29
Page 29
Page 27
Page 29
Item “I/O” on page
30.
Page 31
Page 32
If the problem still cannot be solved after following the above checks, please consult your nearest authorised JVC service
agent.