Filter
Top Products
6
8
[AUTO] button
When this button is pressed, the unit enters the AUTO SE-
QUENCE mode, in which the indicator lights up and the
MONITOR OUTPUT 1 connector
‚
on the rear panel out-
put the camera video signals according to automatic switch-
ing.
REF. : “AUTO SEQUENCE OPERATION” on page 13.
9
[F1, F2, F3] Function buttons
These buttons are valid only when SW-D7000/SW-D8000
frame switchers are being used.
When this unit is operated in the B mode, these buttons
can control certain functions of the specific frame switcher
model connected to this unit. The RS-232C control is in-
volved in this control operation.
For details, please consult your dealer or JVC-authorized
service agent.
REF. : “APPLIED SYSTEM (B MODE)” on page 22.
F1: Single-screen select switch
Press this button to output a single-screen video from
the frame switcher.
The camera number can be selected using the numeric
keypad, etc.
F2: Split-screen select switch
Press this button to output a split-screen video from
the frame switcher.
F3: LIVE/PLAY switch
Press this button to switch between the playback video
of a time-lapse VCR and the camera video.
0
[CAMERA] button
Press when selecting a camera.
To select a camera, use the following buttons:
CAMERA button
0
→ Numeric key buttons
*
→
ENTER button
&
.
REF. : “CAMERA SELECTION” on page 10.
!
[POSITION] button
Press when selecting one of the position numbers preset
for the camera.
To select a position, use the following buttons:
POSITION button
!
→ Numeric key buttons
*
→ EN-
TER button
&
.
REF. : “POSITION SELECTION” on page 11.
@
[OPTION 1, 2]
These buttons are not used for the present. Do not touch
them.
#
[PAN/TILT] control lever
Operate the lever to pan (swing horizontally) or tilt (swing
vertically) the rotary turret of a camera.
8(Up) : Tilt the lever in this direction to tilt the rotary
turret upward.
9(Down):Tilt the lever in this direction to tilt the rotary
turret downward.
;(Right) :Tilt the lever in this direction to pan the rotary
turret toward the right.
:(Left) : Tilt the lever in this direction to pan the rotary
turret toward the left.
REF. : “MANUAL OPERATION” on page 12.
While a menu screen is displayed, this lever is used to
select or to set an item.
REF. : “MENU OPERATION METHOD” on page 26.
1. INTRODUCTION
CONTROLS, CONNECTORS AND INDICATORS (Continued)
SETUPSETUP
MENUMENU SETSET
SPEEDSPEED
IRISIRIS
AFAF
FOCUSFOCUS
ZOOMZOOM
OPENOPEN
FARFAR
TELETELE CLEARCLEAR
/HOME/HOME
7
4
1
8
0
5
2
9
6
3
ENTERENTER
AUTOAUTO
PANPAN
OPTIONOPTION
1
OPTIONOPTION
2
CAMERACAMERA
POSI-POSI-
TIONTION
AUTOAUTO
PATROLPATROL
CLOSECLOSE
NEARNEAR
WIDEWIDE
AUTOAUTO F-1F-1 F-2F-2 F-3F-3
PAN/TILTPAN/TILTLENSLENS
CAMERA/POSITION
CAMERACAMERA POSITIONPOSITION
REMOTE CONTROL UNIT REMOTE CONTROL UNIT
RM-P2580RM-P2580
ALARMALARM
POPOWERWER
KEY LOCKKEY LOCK
*&(
¤
⁄
)
‹
$^ %
9
@
#
0
8
!