Filter
Top Products
Taking pictures and videos
15 www.kodak.com/go/support
Using optical zoom
Use optical zoom to enlarge your subject by up to 3X. You can change the
optical zoom during video recording.
1 Use the camera screen to frame your subject.
2 Press the Zoom button T (Telephoto) to zoom
in. Press W (Wide Angle) to zoom out.
3 The zoom indicator appears on the camera
screen. Press the Zoom button T to move the
indicator upward, and the Zoom button W to
move it downward.
4 Take a picture or video.
Using digital zoom
Use digital zoom in any still mode to get additional magnification beyond
optical zoom. Combined zoom settings are from 3X to 15X.
1 Press the Zoom button T (Telephoto) to the optical zoom limit.
2 Release the button, then press it again.
The camera screen displays the zoomed image and the zoom indicator.
IMPORTANT:
You may notice decreased print image quality when using digital
zoom. The blue slider on the zoom indicator pauses and turns red
when the picture quality reaches the limit for an acceptable 4 x 6 in.
(10 x 15 cm) print.
3 Take a picture normally.
NOTE: You cannot use digital zoom during video recording.
Images taken
in the red
range should
not be printed
due to the
decline in the
Border of the
digital zoom
and optical
Red and
yellow:
Blue:
Optical range
Z
oom indicator