Filter
Top Products
Taking pictures and videos
www.kodak.com/go/support
18
* When you change to Red-eye in this mode, it remains on until you change it.
All other flash settings return to the default when you exit the mode or turn
off the camera.
Manually setting the white balance
You can manually set the white balance when shooting in custom mode.
1 In Custom mode, press the Menu button.
2 Press to highlight White balance , then press the OK button.
3 Press to highlight Manual, then press the OK button.
The white balance screen is displayed.
4 Take a picture of a blank sheet of white paper in the entire camera screen.
5 Press the OK button.
To retake the picture, select Retry, then press the OK button.
The white balance setting is recorded in the camera.
Candle Light Off Auto red-eye reduction
Sunset Off Fill
Auction Off Auto, Fill, Off
Video Off None
Burst Off
Capture mode Default setting Available settings