Filter
Top Products
41 www.kodak.com/go/support
4 Using the Kodak Photo
Frame Dock
In certain regions, the Kodak Photo Frame Dock is included. By
connecting the camera to the Photo Frame Dock, the camera can be
used like a picture frame to display pictures saved in the camera.
1 Place the camera in the Photo Frame Dock.
2 Plug the Photo Frame Dock’s power cord into the outlet.
3 Press the Photo Frame button on the Photo Frame Dock.
NOTE: For details about connecting the camera to the Photo Frame Dock or connecting the power
cable, see the Photo Frame Dock’s user guide.
Photo Frame display settings
1 Press the Mode button on the camera to highlight Camera setup .
2 Press to highlight Photo Frame settings , then press the OK
button.
3 Press to highlight the option you want to change, then press the OK
button.
Interval—The picture changes after the set time has passed. The interval
can be set for 1 second, 5 seconds, 10 seconds, 30 seconds, 1 minute, or 5
minutes.
Order—Set the order of the pictures to be displayed. Select One time to
cycle through all the saved pictures once, select Loop to show
continuously, and select Random to display randomly.
Effect—Add an effect to be used when the picture is displayed. You can
choose from: Fade, Block, Vertical Blind, Center to Left/Right, Left to Right,
Right to Left, Center to Up/Bottom, Up to Bottom, Bottom to Up.
Display Clock—Show a clock with the picture. You can choose from
Analog clock and Big/Small Digital clock.