Filter
Top Products
Taking pictures and videos
www.kodak.com/go/support
30
Recording in Time Lapse Capture Mode
You can take a series of pictures with a time delay between each picture.
1 Press the Mode button to highlight Video then press the Menu button.
2 Press to highlight Time Lapse Capture , then press the OK button.
3 Press to highlight ON, then press the OK button.
4 Press to highlight Option, then press the OK button.
Interval—Set the time between each picture.
Choose from 10 sec, 30 sec, 1 min, 5 min, 10 min, 15 min, 30 min, 1 hrs, 3
hrs, 6 hrs, 12 hrs, or 24 hrs.
Number of frames—Set the number of pictures to be taken.
When Auto is selected, the full remaining capacity of a card will be used for
one video. Note, however, that recording will stop when 10,000 frames are
taken.
When User Define is selected, you can set the length from 10 frames to 500
frames, in 10 frame increments.
AE/AF/AWB Lock—Set whether or not the exposure, focus, and white
balance are fixed.
When No Lock is selected, the camera automatically adjusts the exposure,
focus, and white balance for every picture.
When Lock at first shot is selected, the exposure, focus, and white balance are
automatically set when the first picture is taken. The same settings will be
used from the second picture on.
5 Compose the scene, then press the Shutter button completely down to
start Time Lapse Capture.
6 Press the Shutter button again to end Time Lapse Capture.