Filter
Top Products
Taking pictures and videos
29 www.kodak.com/go/support
Putting yourself in the picture
Use the Self-Timer to create a 10-second delay between the time you press
the Shutter button and the time the picture or video is taken.
1 Place the camera on a flat surface.
2 In any picture-taking mode, press the Menu button.
3 Highlight SELF TIMER and then press the OK button.
4 Highlight ON, then press the OK button.
5 Compose the scene. Then press the Shutter button halfway and hold to set
the exposure and focus, then press completely down. Move so that you are
in the scene.
The Self-Timer light on the front of the camera blinks slowly for 8 seconds (then
quickly for 2 seconds) before the picture is taken. The Self-Timer turns off after
you take the picture or if you change modes.
Putting yourself in the video
1 Place the camera on a flat surface.
2 Press the Mode button to highlight Video mode , and then press the
Menu button.
3 Highlight SELF TIMER , then press the OK button.
4 Highlight ON, then press the OK button.
5 Compose the scene, then press the Shutter button completely down. Move
so that you are in the scene.
The default video length is Continuous. The video stops when you press the
Shutter button or when no storage space remains. To change the video length,
see page 25. To turn off the Self-Timer camera sounds, see page 29. The
Self-Timer turns off after you take the video or if you change modes.