Filter
Top Products
Customer Support: http://www.pandigital.net/kodaksupport 21
Technical Specifications
Specification KODAK P461 Personal Photo Scanner
Media Type
Photo: Up to 4.1 x 12” (Common use: 3.5x5” and 4x6” photo)
Filmstrip: 35 mm Color / B&W Negative filmstrip
Slide: 35 mm Color / B&W Mounted Slide
Common Document Size 3.5”x5”, 4”x6” and 4x11”
Actual Feed Slot Size up to 4.1” x 12”
Length: 12 inches (304.8mm)
Output file formats JPEG with compression (4:2:2)
Resolution (fixed)
Photo: 600x600 dpi (default) and 300x300 dpi
Filmstrip: 1200 x 1200 dpi
Interfaces
Memory Cards Refer to Supported Memory Cards (pg 7)
USB Mini USB port compatible USB 2.0
USB Mass Storage Supported WINDOWS 2000 / XP / VISTA / WINDOWS 7
Power
Batteries
Input 100-240V AC, 50/60 Hz, Output 5V, 1A
Takes four AAA (UM-4) batteries (not included). Recommend rechargeable batteries for optimal
number of scans. Rechargeable battery life in 600dpi averages 100+ scans per charge. Actual battery
life may vary based on usage.
Photo feeding
Sheet-fed type (single-pass)
Twin roller design
Transparency feeding
Filmstrip fed with Filmstrip Guide Adapter
Mounted Slides fed with Slide Holder
Dimensions
2.25” (L) x 10.5” (W) x 2” (H)
61.7 mm (L) x 269.3mm (W) x 52 (H) mm
Net weight 0.75 lbs (455g)
Operating Temperature
Operating Humidity
15ºC ~ 35ºC (59
o
F~95
o
F);
20% RH ~ 70% RH
Storage Temperature
Storage Humidity
-20ºC ~ 60ºC (59
o
F~95
o
F);
10% RH ~ 90% RH
Frequently Asked Questions
Q: What would cause strange lines on the scanned picture or unclear?
A: Check the following:
Are there scratches on the original, or is the original clean? Remove any stains or dust from the original before scanning.
Has the scanner been used for a long period of time without cleaning and calibration? Follow the instructions for "Cleaning
the scanner" on page 18 and “Calibrating the scanner" on page 19, and then try again.
Q: Why isn’t the scanned filmstrip image rotating properly?
A:
The current “auxiliary” OCR capability has difficulty distinguishing the direction of some numbers, (i.e.,“6”, “9”). If the number’s
position is near the edge of the filmstrip, it can easily be worn out or damaged, and then it can’t be detected in the expected
position, or meet the required conditions causing the Auto Mirror/Flip function to be disabled
(see page 10).
Please follow the
indicator on the filmstrip guide adapter to re-scan the filmstrip.
Q: How do I clear an original that is stuck halfway in the feed slot?
A: Press the Power button; the scanner ejects the original so you can remove the jammed original from the feed slot in
photo/slide scanning, and Transparency output slot in filmstrip scanning.
Width 4.1 inches (105mm)