Konica Minolta DiMAGE 7i Digital Camera User Manual


 
134
SETUP MODE
SETTING THE DATE AND TIME
It is important to accurately set the clock.When a still image or a movie clip is recorded, the date and
time of the recording are saved with the image and are displayed during playback or can be read with
the DiMAGE Viewer software included on the CD-ROM.The camera’s clock is also used with data
imprinting.
When the Date/Time-set option is selected and entered, the date/time screen will be displayed.The
left/right keys of the controller are used to select the item to be
changed and the up/down keys are used to change the value.
From left to right, the screen shows the year, month, day, hour,
and minute.When the date and time have been adjusted, set the
clock by pressing the central button of the controller.
Enter
Setup
Date/Time set
2001 7 20 16 33:..
EVF AUTO SWITCH – CONTROLLING THE
AUTO-DISPLAY FUNCTION
This option controls the auto-display function in the recording and movie mode (p. 102).The auto-
EVF/LCD setting allows the display to switch between the EVF and LCD monitor automatically. The
EVF-auto-on setting turns off the LCD monitor and uses the eye sensors to activate only the EVF
when in use.This setting will help conserve battery power.