Konica Minolta DiMAGE 7i Digital Camera User Manual


 
148
CHANGING THE COMPACTFLASH CARD (DATA-TRANSFER MODE)
Care should be taken when changing CompactFlash cards while the camera is attached to the com-
puter. Data could be lost or damaged if the camera is not properly disconnected.
WINDOWS 98 / 98 SECOND EDITION
1.Turn off the camera.
2. Change the CompactFlash card.
3.Turn on the camera.
4. Use the data-transfer menu to remake the USB connection.
WINDOWS ME, 2000 PROFESSIONAL, AND XP
MACINTOSH
Always confirm the access lamp is out
before removing the CompactFlash card.
1. Stop the USB connection using the unplug-or-eject-hardware routine (p. 146).
2.Turn off the camera.
3. Change the CompactFlash card.
4.Turn on the camera.
5. Use the data-transfer menu to remake the USB connection.
1. Stop the USB connection by dragging the drive icon into the trash (p. 146).
2.Turn off the camera.
3. Change the CompactFlash card.
4.Turn on the camera.
5. Use the data-transfer menu to remake the USB connection.
DATA-TRANSFER MODE