Konica Minolta DiMAGE 7i Digital Camera User Manual


 
140
CONNECTING TO WINDOWS 98 / 98 SECOND EDITION
The driver needs only to be installed once. If the driver cannot be installed automatically, it can be
installed manually with the operating system’s add-new-hardware wizard; see the instructions on the
following page. During installation, if the operating system requests the Windows 98 CD-ROM, inset it
into the CD-ROM drive and follow the accompanying instructions on the screen.
Before connecting the camera to the com-
puter, place the DiMAGE software CD-
ROM in the CD-ROM drive.The DiMAGE
installer menu should automatically acti-
vate. To automatically install the Windows
98 USB driver, click on the starting-up-
the-USB-device-driver-installer button. A
window will appear to confirm that the dri-
ver should be installed; click “Yes” to con-
tinue.
When the driver has been successfully
installed, a window will appear. Click “OK.”
The camera can now be attached to the
computer (p. 138).
AUTOMATIC INSTALLATION
DATA-TRANSFER MODE