Filter
Top Products
46
RECORDING MODE
MEMORY – STORING CAMERA SETTINGS
Three sets of camera settings can be saved.This saves time under frequently
repeating conditions by eliminating the need to set the camera. Except for the
spot AEL button, subject programs, data imprinting, voice memo, and instant
playback settings, all recording-mode camera settings will be saved including the
position of the Flex Focus Point, the custom white balance setting, and changes
made with the function dial and digital effects control. Although the bracketing
drive mode setting can be saved, the type of bracket, exposure, contrast, color
saturation, or filter must be reset.
To save the current camera settings, turn the function dial to
the memory position, and press the function button (1) to dis-
play the memory settings on the monitor.Turn the control dial
to highlight the store-memory option. Release the function
button to open the store-memory screen.
Memory 1
Memory 2
Memory 3
Store memory
1
2
Camera settings are saved with the function dial (p. 44). Initially,
each memory location contains the camera’s original settings.
On the store-in-memory screen, use the up/down keys of the
controller (3) to select the memory register in which the cam-
era settings are to be saved. Press the central button of the
controller (4) to save the settings; the previous settings will be
erased and replaced by the new ones. A confirmation screen
will open; press the central button of the controller to close.
Rec.
Store memory
select enter
1
Store in 1
2
3
3
4