Filter
Top Products
143
CONNECTING TO MAC OS 8.6
To download and install this software, follow the instruction on the Apple web site. Always read the
attached terms and conditions before installing any new software.
To access this camera with a computer with Mac OS 8.6, the USB storage support software must be
installed first.This software is supplied by Apple Computer, Inc. free of charge.The latest version can
be downloaded from the Apple Software Updates web site at http://www.apple.com/support.
AUTO POWER SAVE (DATA-TRANSFER MODE)
If the camera does not receive a read or write command within ten minutes, it will shut down to save
power. When the camera shuts down, an unsafe-removal-of-device warning may appear on the com-
puter monitor. Click “OK.” Neither the camera or computer will be damaged in this operation.
Pressing the shutter-release button will reactivate the camera. Remake the USB connection with the
data-transfer menu (steps 6 and 7 on page 139).
To view images correctly on your computer, the monitor’s color space may need to be adjusted.
Refer to your computer manual on how to calibrate the display to the following requirements:
sRGB, with a color temperature of 6500K, and a gamma of 2.2.
Camera Notes