Filter
Top Products
34
A
DVANCED RECORDING
ADVANCED RECORDING
This section cover the advanced recording features of this camera. Read the basic recording sec-
tion before moving on to this section.
3. Flash-mode indicator (p. 26)
7. White-balance indicator (p. 55)
8. Camera-sensitivity (ISO) display (p. 59)
12. Metering-mode indicator (p. 58)
10. Camera-shake warning (p. 27)
13. Shutter-speed display
14. Aperture display
24. Digital-zoom display (p. 53)
19. Drive-mode indicator (p. 45)
17. Date-imprinting indicator (p. 93)
18. Frame counter (p. 52)
25. Color-mode indicator (p. 60)
23. Image-size display (p. 51)
22. Image-quality indicator (p. 51)
2. Mode indicator
A. Focus frame
B. Spot metering area (p. 58)
11. Exposure-mode indicator (p. 36 - 38)
15. Macro-mode indicator (p. 35)
9. Exposure-compensation display (p. 41)
4. Flash-compensation display (p. 57)
Recording mode display
1. Wide-angle converter indicator (p. 90)
5. Sharpness display (p. 61)
6. Contrast display (p. 60)
20. Manual-focus scale (p. 54)
16. Focus-mode indicator (p. 54)
21. Battery-condition indicator (p. 14)
35
Macro
Approximate location of CCD
plane
Macro indicator
Macro mode allows the camera to focus as close as 1 cm (0.4
in.) from the front of the lens or 8 cm (3.1 in.) from the CCD.
The focus range changes with the zoom ‘s focal length, see
below.
Press the macro button (1) to select the macro mode. Press the
macro button again to cancel the macro mode.
The following chart lists the macro ranges. All distances are
measured from the CCD.
Wide-angle position: 8 - 107cm (3.1 - 42.1 in.)
26.5 - 30.8mm: 107 - 237cm (42.1 - 93.3 in.)
Telephoto position: 67 - 207cm (26.3 - 81.5 in.)
1
The internal-memory indicator appears when a memory card is not inserted in the
camera.
Internal-memory indicator