Filter
Top Products
96
S
ETUP MENU
Video output
Camera images can be displayed on a television (p. 84). The video output can be changed between
NTSC and PAL in section 4 of the setup menu. North America uses the NTSC standard and Europe
uses the PAL standard. Check which standard is used in your region to play back images on your
television set.
Shutter FX
When the shutter is released, a shutter sound effect gives a positive confirmation a still image is
recorded. The sound effect can be turn off in section 3 of the setup menu (p. 87). Two shutter
effects are available.
Self-timer
The self-timer delay period can be changed in section 4 of the setup menu (p. 87). Two delay peri-
ods are available, 10 seconds and 2 seconds.
Focus signal
When the shutter-release button is pressed partway down, an audio signal confirms the AF system
has focused. The focus signals can be changed or turned off in section 3 of the setup menu (p. 87).
Two tones are available.
Transfer mode
The data-transfer mode must be specified depending on whether images are transferred to a com-
puter or printed directly. The data-storage option must be selected to transfer data from the camera
to a computer or when using the DiMAGE Viewer software. The PictBridge option allows images to
be printed directly from the camera with a PictBridge compatible printer (p. 108).
97
DATA-TRANSFER MODE
Read this section carefully before connecting the camera to a computer. Instructions on using and
installing the DiMAGE Viewer software are found in the supplied software manual. The DiMAGE
manuals do not cover the basic operation of computers or their operating systems; please refer to
the manual supplied with your computer.
Check the Konica Minolta web site for the latest compatibility information:
North America: http://www.konicaminolta.us/
Europe: http://www.konicaminoltaeurope.com/software/pi_customer.html
Users with Windows 98 or 98 Second Edition will need to install the driver software on the included
DiMAGE Viewer CD-ROM (p. 99). No special driver software is required for other Windows or
Macintosh operating systems.
Customers who have bought a previous DiMAGE digital camera and have installed the Windows 98
driver software must repeat the installation procedure. The updated version of the driver software
included on the supplied DiMAGE Viewer CD-ROM is required for the operation of the DiMAGE Z20
with a computer. The new software will have no affect on the performance of older DiMAGE cam-
eras.
A remote camera driver is supplied in the Windows edition of the DiMAGE Viewer CD-ROM. The dri-
ver is not compatible with this camera.
System requirements
For the camera to be connected directly to the computer and used as a mass-storage device, the
computer must be equipped with a USB port as a standard interface. Both the computer and the
operating system must be guaranteed by their manufacturers to support USB interface. The follow-
ing operating systems are compatible with the camera:
Windows 98, 98SE, Me, 2000 Professional, and XP home and professional editions.
Mac OS 9.0 ~ 9.2.2 and Mac OS X v.10.1.3 - 10.1.5, v.10.2.1 ~ 10.2.8, v.10.3 ~10.3.6.