Konica Minolta Dynax/Maxxum 5D Digital Camera User Manual


 
112
A
CCESSORY NOTES
This camera is compatible with the High Speed Sync.
(HSS) function in the Program/Maxxum Flash 5600HS(D)
and 3600HS(D). This allows the camera to use its full
range of shutter speeds up to 1/4000 second. HSS cannot
be used with the 2-second self-timer drive mode nor the
rear sync. flash mode.
Attach a compatible flash unit to the camera. Set the flash
unit to HSS. When the shutter speed exceeds the camera
sync. speed, the High Speed Sync. indicator (H) is
displayed on the monitor and in the viewfinder.
HIGH-SPEED SYNC. (HSS)
To extend the versatility of the camera, an accessory flash unit (sold separately) can be
used. Always remove the accessory flash when the camera is not in use, and replace the
accessory-shoe cap to protect the contacts.
ATTACHING AN ACCESSORY FLASH UNIT
Slide the accessory-shoe cap off as shown.
Mount the flash unit on the accessory shoe
by sliding it forward until it stops.
FLASH COMPATIBILITY
The following flash units are compatible with this camera:
Maxxum/Program Flash 2500(D)
Maxxum/Program Flash 3600HS(D)
Maxxum/Program Flash 5600HS(D)
Macro Ring Flash 1200 with Macro Flash Controller
Macro Twin Flash 2400 with Macro Flash Controller
High Speed Sync. indicator