Konica Minolta Dynax/Maxxum 5D Digital Camera User Manual


 
21
INSTALLING AND CHANGING THE BATTERY
1. Open the battery-chamber door by sliding the battery-chamber release toward the
back of the camera.
2. Insert the battery with the battery contacts first. Push the battery into the chamber
until the battery latch clicks into place.
3. To remove a battery, slide the battery latch to the side of the battery chamber; the
battery springs out.
4. Close the battery-chamber door until it clicks shut.
This digital camera uses one NP-400 lithium-ion battery. Before using the battery, read
the safety warnings on pages 4 of this manual. When replacing batteries, the camera
should be off.