Konica Minolta Dynax/Maxxum 5D Digital Camera User Manual


 
44
A
DVANCED RECORDING
MANUAL EXPOSURE - M
1. Turn the control dial to change the shutter
speed.
2. Press and hold the exposure-
compensation button and turn the control
dial to change the aperture.
The operation to change the aperture and
shutter speed can be reversed in section
1 of the custom menu (p. 95).
3. Press and hold the AEL button and turn
the control dial to shift the shutter speed
and aperture without affecting the
exposure.
Manual exposure mode allows individual selection of shutter speeds and apertures. This
mode overrides the exposure system giving the photographer control over the final
exposure. Bulb exposures can be made, see below. Manual exposure is set with the
exposure-mode dial (p. 39).
The set exposure is 1.0Ev less (–) than the exposure determined
by the meter.
The arrow indicates the set exposure is 2.3Ev more (+) or less (–)
than the exposure determined by the meter.
The blinking arrow indicates the set exposure is ±2.7Ev or
greater than the exposure determined by the meter.
The Ev scale on the monitor and in the viewfinder indicates the difference between the
set exposure and the exposure determined by the camera meter. Press the shutter-
release button partway down to activate the meter. The manual metering (M.M.) indicator
is displayed on the monitor Ev scale.