Konica Minolta Dynax/Maxxum 5D Digital Camera User Manual


 
141
After initially inserting the battery, do not remove it for twelve hours; the camera can be
off during this period. The main battery is used to charge an internal battery, which
protects settings when the main battery is removed.
Keep battery and camera charger contacts clean. Dirty contacts can prevent charging.
If the contacts become dirty, wipe them with a cotton swab.
LCD MONITOR CARE
The LCD monitor is manufactured using high-precision technology and more than
99.99% of the pixels operate properly. Less than 0.01% of the monitor pixels are
displayed as color or bright points; this is not monitor defect and does not affect the
recorded image.
Do not apply pressure to the surface of the LCD monitor; it may be permanently
damaged.
In a cold environment, the LCD monitor may become temporarily dark. When the
camera warms up, the display will function normally.
If fingerprints are on the LCD monitor surface, gently wipe with a soft, clean, dry cloth
.
COPYRIGHT
TV program, films, video tapes, photographs, and other materials may be copyrighted.
Unauthorized recording or duplication of such material may be contrary to copyright
laws. Taking pictures or images of performances, exhibitions, etc. is prohibited without
approval and can infringe on copyright. Images protected by copyright can only be used
under the provisions within the copyright laws.
BEFORE IMPORTANT EVENTS OR JOURNEYS
Check the camera’s operation; take test pictures and purchase spare batteries.
• Konica Minolta has no responsibility for any damage or loss incurred by equipment
malfunction.
QUESTIONS AND SERVICE
If you have questions about your camera or charger, contact your local camera dealer
or write to the Konica Minolta distributor in your area.
• Before shipping your camera or charger for repair, please contact a Konica Minolta
service facility.