Konica Minolta Dynax/Maxxum 5D Digital Camera User Manual


 
114
D
ATA-TRANSFER MODE
DATA-TRANSFER MODE
Read this section carefully before connecting the camera to a computer. This manual
does not cover the basic operation of computers or their operating systems; please refer
to the manual supplied with your computer.
For the camera to be connected directly to the computer and used as a mass-storage
device, the computer must be equipped with a USB port as a standard interface. The
computer and the operating system must be guaranteed by their manufacturers to
support USB interface. The following operating systems are compatible with the camera:
Compatibility with Windows XP is with the home or professional editions only. Check the
Konica Minolta web site for the latest compatibility information:
North America: http://www.konicaminolta.us/
Europe: http://www.konicaminoltasupport.com
Users with Windows 98 or 98 second edition will need to install the driver software on the
included Digital Camera Software CD-ROM (p. 116). No special driver software is
required for other Windows or Macintosh operating systems.
Customers who have bought a previous DiMAGE or Dynax / Maxxum digital camera and
have installed the Windows 98 driver software must repeat the installation procedure.
The updated version of the driver software included on the supplied Digital Camera
Software CD-ROM is required for the operation of the this camera with a computer. The
new software will have no affect on the performance of previous cameras.
A remote camera driver is supplied in the Windows edition of the Digital Camera Software
CD-ROM. This driver is not compatible with this camera.
Windows 98, 98SE, Me, 2000 Professional, and XP
Macintosh OS 9.0 ~ 9.2.2 and Mac OS X 10.1.3 ~ 10.1.5, 10.2.1 ~ 10.2.8, 10.3 ~ 10.3.9, 10.4 ~ 10.4.1
SYSTEM REQUIREMENTS