Konica Minolta Dynax/Maxxum 5D Digital Camera User Manual


 
136
T
ROUBLESHOOTING
Problem
Symptom Cause Solution
The camera
will not work.
Nothing
displayed on
monitor.
The battery is dead.
The AC adapter is not
connected properly.
R
echarge battery (p. 20).
Check that the adapter is
connected to the camera and
a live electrical outlet (p. 22).
The section covers minor problems with basic camera operation. For major problems or
damage to the camera or charger, or if a problem continues to reoccur frequently, contact
a Konica Minolta service facility.
Camera
overheating
message is
displayed
before shutting
down.
The camera is hot or it
has been left in a very
hot environment.
Turn off the camera and allow
it to cool.
Shutter will
not release.
“0000” is
displayed on
the frame
counter.
Memory card is full and
unable to store an image
at the image-quality or
image-size setting on the
camera.
Insert a new
memory card (p.
24), delete some images (p.
36), or change the image-
quality or image-size setting
(p. 70).
TROUBLESHOOTING
“----” is
displayed on
the frame
counter.
No memory card in the
camera.
Insert a
memory card (p. 24).
Display mode set to off.
Change the display mode to
full or basic (p. 33).