Filter
Top Products
CONTROL - FRONT PANEL:
1. Removable Cartridge Casing
The built-in DVR comes with a removable hard disk drive tray.
2. PIP / SEQ - this button performs two functions:
(1) PIP : Holding this button for 3 seconds triggers the Picture-In-Picture display. PIP allows you to
view two camera locations simultaneously, one being the main channel, the other being
viewed as a sub-picture. Dual PIP can also be selected, which displays two sub-pictures as
illustrated below.
To change between Single PIP and Dual PIP, repeatedly press the PIP button.
To swap the positions of cameras appearing in PIP (between the Main and Sub screen), hold
this button for 3 seconds. To exit PIP mode, press the QUAD button.
(2) SEQ : Used to sequence between all camera locations in full screen in sequential order with the
screen automatically switching. Press SEQ again to stop sequential viewing. Sequence
settings are programmable via the Menu, refer to page 9 for more details.
3. A-SEL / MENU - This button performs two functions:
(1) A-SEL: In Quad mode, you can select the channel with audio. Pressing this button automatically
changes the audio from channel to channel. An audio microphone symbol will appear in the corner
of a Quad screen to indicate audio is available on a particular channel.
(2) MENU: Holding this button for 3 seconds brings up the Main Menu. Please refer to page 8 For
more information on Menu options.
4. TALK - By pressing and holding this button the user has the ability to talk to a specific camera
location. This button must be pressed the entire time, while talking. To listen to the camera
location, release the Talk button.
SINGLE PIP
DUAL PIP
SINGLE PIPSINGLE PIP
DUAL PIPDUAL PIP
-5-
MI C
HDD
FULL
POWER/TI MER
RECSEARCHTALK
MENU
A-SEL
EVENT
HDD
PLAY
ALARM
REC
SEQ
PIP
QUAD CH4CH3CH2CH1
1 32 4 5 6 7 8 9
1011121314