Filter
Top Products
ter will blink as a warning. Flash operation with
secondary reflector (40 MZ-3 / -3i, 50 MZ-5,
54 MZ-... and 70 MZ-5) is not possible! The
shutter speed must not be faster than 1/60 s!
Master flash units
The flash units mecablitz 40 MZ-..., 54 MZ-..., 70
MZ-... and 76 MZ-5 digi permit cordless flash con-
trol in the “Metz Remote Flash Mode” as a master
flash unit. For the setting instructions for this
“controller mode” please refer to the manual of
the given flash unit.
Slave flash units
The flash units 28 CS-2 digital, 34 CS-2, 34 CS-2
digital, 40 MZ..., 44 MZ-2, 45 CL-4 digi, 50
MZ..., 54 MZ-... , 70 MZ-... and 76 MZ-5 digi per-
mit cordless flash control as a slave unit by the
“Metz remote flash mode”. The flash units 40
MZ-..., 44 MZ-..., 45 CL-4 digi, 54 MZ-... and 70
MZ-4 require the SCA 3083 digital slave adapter
for this purpose. The handle-mount flash units
mecablitz 50 MZ-5 , 70 MZ-... and 76 MZ-5 digi
can be used without slave adapter.
The slave units must operate in TTL flash
mode for the Metz Auto Remote Mode so that
they can be controlled by the master flash
unit. For further details relating to slave mode
please refer to the operating instructions for
the given flash unit or the SCA 3083 digital
slave adapter manual.
6. Slave flash mode
Slave flash mode is not supported by the digi-
tal cameras E-1 and E-300.
☞
☞
29
ķ