Filter
Top Products
slave mode of the SCA adapter (switch ባ in SL
position) always operates with metering pre-
flash suppression, the camera’s “SLAVE” mode
must NOT be activated!
To work in the “SLAVE” camera setting the slave
flash unit must be equipped with the SCA 301
standard foot. Additionally use the mecalux 11
(optional accessory) as a slave triggering unit for
the flashgun.
1.1 View of the SCA adapter
The switches and the display are located
behind a flap on the back of the adapter. This
flap can be opened with the fingernail.
Switch ቢ:
A B: Reserved for future applications. The switch
position is irrelevant!
☞
8
Rear view
Front view
Sensor