Filter
Top Products
9
Switch ባ:
Operating mode selector:
NORM position: Dedicated flash mode
SL position: Slave flash mode
Display
ቤ in dedicated flash mode:
• In dedicated flash mode the display ቤ lights in
green if the flash mode TTL, Automatic A or
Manual M set on the flash unit is supported.
With some camera/flash unit combinations there
are limitations regarding TTL flash mode. The
display ቤ flashes in green as a warning (see
Section 3.1).
If the master flash function (controller) is activa-
ted on the flash unit in TTL mode, then the dis-
play ቤ of the SCA adapter will start to flash as
a warning (see Section 5).
•
With some flash units (45 CL–4 and 60 CT4) auto
working aperture setting on the flash unit by the
camera is not possible for technical reasons. This
means that the camera modes program P and
shutter priority S are not supported in the auto
flash mode A and the manual flash mode M (see
Table 2).The display ቤ flashes in green as a
warning in the camera modes P and S.
Display ቤ in slave flash mode:
• The display ቤ lights in red when in slave mode
if the flash modes Auto A or Manual M are set on
the flash unit.
• The display ቤ flashes in red in slave mode as a
warning when the TTL flash mode has been set
on the flash unit (see Section 6).
ķ