Filter
Top Products
"%
A. Installing the Camera
Driver (Only Window 98/98SE
required)
Shut down all other applications
before installing the camera driver.
1. Turn on your computer, then
insert the supplied Microtek CD-
ROM into the CD-ROM drive.
The Microtek Software Installer
screen automatically comes up.
2. Click Camera Driver when it
appears on the screen, then
follow the on-screen instructions
to install.
3. Click EXIT on the Microtek
Software Installer screen when
the camera driver has been
installed.
4. Restart your computer.
B. Getting the Camera
Ready
Without an SD card installed:
Set the Mode switch to
(Playback).
With an SD card installed:
Make sure the SD card
containing the images you want
to download is inserted in the
camera.
Set the Mode switch to
(Playback).
Locating Images
Location of images is only
accomplished when your camera
is in the Playback mode of
operation.
If an SD card is not inserted in
the camera, the images available
for viewing are those held in the
cameras internal memory.
If an SD card is inserted, the
images available for viewing are
those held in the inserted SD
card (external memory).
NOTE:
The SD card may be placed into
any card reader device. The still
images, movies, and audio stored
on the card can then be read from
the card reader and copied to the
computer.
Camera Driver*
(V: Required, : Not required)
Mass Storage PC/Web
Driver Cam Driver
WIN 98/98SE V V
WIN 2000/Me/XP V
Mac OS 9.x V
Mac OS 10.x V**
*Functions of camera driver vary,
depending upon the system you are using.
**Microtek is continuing to develop the
PC/Web Cam driver in Macintosh OS X.
Current released version has not
implemented this driver for Mac OS X.