Filter
Top Products
92
Connecting to a Computer, Printer, or TV
Viewing Photographs on TV
A Video Cable EG-D100 (available separately; A 156) can be used to connect the camera
to a television or VCR for playback or recording.
1 Turn the camera off. Always turn the camera off before
connecting or disconnecting the video cable.
2 Connect the camera to the TV using the video cable.
3 Tune the television to the video channel.
4 Turn the camera on.
Press P to begin playback. During playback, images will be
displayed on the television or recorded to video tape.
Use the same operations for playing images back in the camera
monitor to play them back on a television.
The camera monitor will remain off.
B Notes on Power Source
When connecting the camera to a computer or printer, use batteries with adequate charge
remaining to prevent the camera from turning off unexpectedly. To power the camera continuously
for extended periods, use an optional AC Adapter EH-5a with Power Connector EP-5 (A 156).
B Connecting the USB Cable
Be sure that the connectors are oriented correctly, and do not use force, to connect the USB cable.
When disconnecting the USB cable, do not pull the connector at an angle.
B Video Mode
Be sure that the camera’s video mode setting conforms to the standard used by your television. The
video mode setting is an option set in the setup menu>Video mode (A 123).
Connect to
video device
Connect to camera