Filter
Top Products
115
Custom Settings
Menu Guide
17 Remote on Duration
Choose how long the camera will wait for a signal from the remote before cancelling
delayed or quick-response remote modes (A 55) from 1 min. (default setting), 5 min.,
10 min., or 15 min.
Remote control mode is cancelled if the length of time selected elapses without no
photographs have been taken after selection of the remote control mode.
18 Date Imprint
Date and time of recording can be imprinted on photographs.
At settings other than Off, z appears in the Shooting
information display.
Date is imprinted on photographs as shown below.
B Date Imprint
• Imprinted dates form a permanent part of image data and cannot be deleted.
• The date is recorded using the format selected in Date item (A 21).
• Date and time cannot be imprinted on photographs taken at image quality settings (A 50) of
U or X.
C Date Imprint and Print Set
When printing from DPOF-compatible printers which support printing of shooting date and photo
information, the date and information can be printed on photographs without date and time
imprinted on them, using options in the Print set menu (A 90).
Off (default setting)
Date and time are not imprinted on photographs.
w
Date
Date is imprinted on the bottom right corner of photographs taken while this option is in
effect.
x
Date and time
Date and time are imprinted on the bottom right corner of photographs taken while this
option is in effect.
y
Date counter (A 116)
Time stamp shows number of days between date of recording and selected date.
(Displayed When Full Is Selected;
A
118)
(Displayed When Full Is Selected;
A
118)
2008.04.01
2008.04.01
2
2
0
0
0
0
8
8
.
.
0
0
4
4
.
.
0
0
1
1
2008.04.01
Photographs taken in “tall” (portrait) orientation
with On selected for Auto image rotation (A 128)