Filter
Top Products
111
Custom Settings
Menu Guide
07 Image Review
If On (default setting) is selected, photographs will automatically be displayed in the
monitor after shooting. The length of time photographs are displayed depends on the
option selected for Custom Setting 15 (Auto off timers; A 114). If Off is selected,
photographs can be displayed in the monitor by pressing P.
09 AF-assist
If On (default setting) is selected and the subject is poorly lit, the AF-assist illuminator will
light when required to assist the focus operation (A 57). Choose Off to disable the AF-
assist illuminator. Note that when the illuminator is off, the camera may not be able to
focus on poorly-lit subjects using autofocus.
10 ISO Auto
Choose whether the camera automatically adjusts ISO sensitivity
when optimal exposure cannot be achieved at ISO sensitivity
selected by the user. ISO auto can be used with the flash. Available
in a, b, c, and d modes.
Off (default setting)
ISO sensitivity will remain fixed at the value selected by the user (A 53).
On
ISO sensitivity will automatically be adjusted if optimal exposure cannot be achieved at
the selected value (flash level is adjusted appropriately).
Max. sensitivity
Photographs taken at higher ISO sensitivities often appear “grainy“.
Choose the maximum ISO sensitivity to prevent ISO auto from increasing the ISO
sensitivity setting too much. ISO auto will not raise ISO sensitivity above the selected
value.
Min. shutter speed
Choose the shutter speed at which ISO auto takes effect in modes a and c. In modes
a and c, sensitivity will only be adjusted if underexposure would result at the shutter
speed selected for this option (slower shutter speeds may be used if optimal exposure
cannot be achieved at the value selected for maximum sensitivity).
(Displayed When Full Is Selected;
A
118)
(Displayed When Full Is Selected;
A
118)
(Displayed When Full Is Selected;
A
118)
Off
On
Max. sensitivity
Min. shutterspeed
ISO auto