Filter
Top Products
18
First Steps
Attaching a Lens
Care should be taken to prevent dust from entering the camera when exchanging lenses.
1 Turn the camera off and remove the body
cap.
Remove the rear lens cap from the lens.
2 Keeping the mounting index on the lens
aligned with the mounting index on the
camera body, position the lens in the
camera’s bayonet mount and rotate the lens
in the direction shown until it clicks into
place.
If the lens is equipped with an A-M or M/A-M switch, select A
(autofocus) or M/A (autofocus with manual priority).
C Lenses for Autofocus
Autofocus with this camera is supported only by AF-S and AF-I lenses. AF-S and AF-I lenses are
equipped with an autofocus motor. Autofocus is not possible when any other type of lens is
mounted, regardless of the autofocus capabilities of the lens itself.