Filter
Top Products
89
Recording and Playing Back Movies
Saving Still Images While Recording Movies
If the shutter-release button is pressed all the
way while recording a movie, one frame is saved
as a still image (JPEG image). Movie recording
continues while the still image is being saved.
• The maximum number of still images that can
be saved during a movie recording (10
images) and Q are displayed at the top left of
the monitor. When f is displayed, a still
image cannot be saved.
• The image quality of the still pictures to be saved is the same as that set for
Image quality
(E23). When Image quality is set to RAW (NRW), still
pictures are saved with Fine as the image quality.
• The image size of the still images to be saved is set to e (3968 × 2232
pixels).
B Notes About Saving Still Images During Movie Recording
• Still images cannot be saved during movie recording in the following situations.
- When movie recording is paused
- When a movie is recorded to the internal memory
- When the remaining movie length is less than 10 seconds
- When Movie options (A90) is set to n 1080/60i, q 1080/50i, g
480/30p, s 480/25p or HS movie
• Frames of a movie that were recorded when a still image was being taken may not
be played back in a seamless manner.
• The sounds of operating the shutter-release button when saving a still image may
be heard in the recorded movie.
• If the camera moves when the shutter-release button is pressed, the image may be
blurred.
7m23s7m23s7m23s