Filter
Top Products
62
Shooting Features
C E (Manual Focus)
• The digits displayed for the gauge on the right of the monitor in step 2 serve as a
guideline for the distance to a subject that is in focus when the gauge is near the
center.
• The actual range at which the subject can be in focus varies depending on the
aperture value and zoom position. To see whether the subject is in focus, check the
image after shooting.
• Manual focus operations can also be assigned to the control ring (A69).
C Notes About Peaking
• The range of the contrast level considered to be in focus can be changed by
adjusting the peaking level. It is effective to set the level low for high contrast
subjects, and high for low contrast subjects.
• Peaking highlights high contrast areas of the image in white. Depending on the
shooting conditions, highlighting may not work properly or areas that are not in
focus may be highlighted.
• You can disable the peaking display using Peaking in the setup menu (A93).