Filter
Top Products
E43
Reference Section
Using Subject Tracking
1 Use the multi selector HI to
select s Subject tracking, and
press the k button.
• Press the d button after changing the
settings and return to the shooting screen.
2 Register a subject.
• Align the subject that you want to track
with the border in the center of the monitor
and press the k button.
• When the subject is registered, a yellow
border (focus area) is displayed around that
subject and the camera begins tracking
that subject.
• If the subject cannot be registered, the
border glows red. Change the composition
and try registering the subject again.
• To cancel subject registration, press the k
button.
• If the camera can no longer track the
registered subject, the focus area
disappears. Register the subject again.
3 Press the shutter-release button
fully to take the picture.
• If the shutter-release button is pressed while
the focus area is not displayed, the camera
focuses on the area in the center of the
frame.
B Notes About Subject Tracking
• If you perform operations such as zooming while the camera is tracking the
subject, the registration is canceled.
• Subject tracking may not be possible in certain shooting conditions.
Rotate the mode dial to A
,
B
,
C, D or i M d button M A
,
B
,
C, D or
i tab (A9) M AF area mode
Target nding AF
Subject tracking
Manual (wide)
Manual (normal)
Manual (spot)
Face priority
AF area mode
25m 0s
25m 0s
25m 0s
840
840
1/250
1/250
F5.6
F5.6
Start
Start
Start
1/250
1/250
F5.6
F5.6
25m 0s
25m 0s
840
840
25m 0s
End
End
End
1/250
1/250
F5.6
F5.6