Filter
Top Products
67
Shooting Features
Metering
Allows you to set the method that the camera uses
to measure the brightness of the subject.
• Default setting: Matrix
E34
Continuous
Allows you to select single or continuous shooting.
• Default setting: Single
E35
ISO sensitivity
Allows you to control the camera’s sensitivity to light.
• Default setting: Auto
When Auto is selected, E is displayed in the
monitor while shooting if ISO sensitivity increases.
• In D (manual) mode, when set to Auto or Fixed
range auto, the ISO sensitivity is fixed at ISO 80.
E39
Exposure
bracketing
The exposure (brightness) can be changed
automatically during continuous shooting.
• Default setting: Off
E40
AF area mode
Allows you to change the method of how the
camera selects the focus area for autofocus.
• Default setting: Target finding AF
E41
Autofocus mode
Allows you to select either Single AF, which focuses
only when the shutter-release button is pressed
halfway, or Full-time AF, which continues focusing
even when the shutter-release button is not pressed
halfway.
• Default setting: Single AF
E44
Flash exp. comp.
Allows you to adjust the flash output.
• Default setting: 0.0
E44
Noise reduction
filter
Allows you to set the strength of the noise reduction
function that is normally performed when saving
images.
• Default setting: Normal
E45
Built-in ND filter
Allows you to select On, Auto or Off for the built-in
ND filter.
• Default setting: Off
E46
Active D-Lighting
Allows you to prevent loss of contrast details in
highlights and shadows and well reproduce the
natural contrast that is seen with the naked eye when
shooting images.
• Default setting: Off
E47
Option Description A