Filter
Top Products
70
Shooting Features
Using the Control Ring in A (Auto), A, B, C, D, i
Modes
1 Rotate the control ring when the
shooting screen is displayed.
• The Standard setting for each shooting
mode (A69) or the last used function is
adjusted.
• The function to be assigned to the control
ring can be set with Control ring options
in the setup menu (A92).
2 Use the multi selector HI to
select the option to be set.
1 C Standard
2 b Exposure +/-
3 E ISO sensitivity
4 C Fine-tune white balance (A-B)
5 D Fine-tune white balance (G-M)
6 E Manual focus
7 E Zoom memory
8 G Shutter speed
9 F Aperture
3 Use the control ring to adjust the setting.
• Press the shutter-release button to take the image.
• The control ring operation screen ends by pressing the k button, or when
no operations are performed for a few seconds.
B When Operating Manual Focus by Using the Control Ring
• The focus mode is set to E (manual focus) when the focus is adjusted manually
by using the control ring. Set the focus mode again to change back to autofocus
(A59) .
• The peaking level cannot be adjusted.
B When Operating Zoom Memory by Using the Control Ring
When zoom memory is operated by using the control ring in A, B, C, D or i
shooting mode, Zoom memory in the shooting menu (A66) is set to On. To move
the zoom position to any position, including the positions that can be set with On,
reset Zoom memory to Off.
Control ring
24mm24mm24mm
Zoom memory
1
2
3
4
5
6
7
8
9