Filter
Top Products
5352
Beyond Point-and-Shoot—Keep or Delete/Sensitivity (ISO Equivalency)
DELETE
No
Yes
SELECT SET
ERASE IMAGESERASE IMAGES
YES OR NO ?YES OR NO ?
ERASE IMAGES
YES OR NO ?
After each shot, the picture you have just taken
will be displayed briefly in the monitor until being
recorded to the memory card. The following
operations can be performed while the picture is
displayed:
Keep or Delete: Picture Review
To Press Description
Delete %
picture
(1)
Pause $
display
(2)
A confirmation dialog will be displayed. Press multi
selector ≤/≥ to highlight option, press > to select.
• Select No to save picture and
return to shooting mode
• Select Yes to delete picture
Display will be paused for twenty
seconds and pause icon ($) will
change to REC. During this time,
you can press 2 button to
record picture and return to
shooting mode, or press 1
button to delete photo as
described above. Picture will be
recorded automatically if no operations are performed for
twenty seconds.
Adjusting Sensitivity
In a mode, the camera sets sensitivity automatically in response to
lighting conditions. When the mode dial is set to å, you can choose
a fixed value for sensitivity from four possible settings.
+
F2.8F2.8F2.81/2501/2501/250
400400400
227222722272
100100
200200
400400
AUTOAUTO
100
200
400
AUTO
161616
Sensitivity (ISO Equivalency) (å only)
100 200 400 AUTO
Sensitivity is set by pressing the zoom button while
holding down the 1 button.
Setting Description
Equivalent to setting of 100 under normal conditions; when
AUTO lighting is poor, however, camera automatically raises sensitivity
(default) to compensate. ISO icon appears in monitor only when sensitivity
raised above 100.
100 Approximately equivalent to ISO rating of 100.
200 Approximately equivalent to ISO rating of 200.
400 Approximately equivalent to ISO rating of 400.
• A slight amount of mottling (noise) may appear in pictures taken at settings
other than 100.
• Changes to sensitivity have no effect in a or SCENE operating modes.
Sensitivity can also be set using the “ISO” item in the å shooting menus
(p. 106).
Sensitivity
displayed in
monitor
E4300 (E) 02.12.9 1:47 PM Page 52