Filter
Top Products
6968
Use an AC Adapter
To eliminate drain on the batteries during extended playback, connect the
camera to an optional EH-21 AC adapter/battery charger or EH-53 AC adapter.
Choosing a Video Mode (p. 93)
The Video Mode item in the SETUP menu offers a choice of NTSC and PAL
standards for video output. Be sure that the standard selected matches that of
any video device to which you connect the camera.
Menu Guide
This chapter is divided into the following five
sections:
Index to Menu Options
An overview of the options available in the camera
menus.
Using Camera Menus
This section describes basic menu options.
The Set-Up Menu
This menu is used for basic camera setup.
The Shooting Menu
This menu contains a number of options for fine-
tuning shooting settings.
The Playback Menu
The playback menu contains options for
managing images stored on memory cards.
Index to Menu
Options
pp. 70-75
Using Camera
Menus
pp. 76-78
The Set-Up Menu
pp. 79-95
The Shooting
Menu
pp. 96-116
The Playback
Menu
pp. 117-129
Camera Menu
Options
Using the video cable provided with your camera, you can connect the
COOLPIX4300 to a television or VCR.
1
Connect the video cable to the camera
• Insert the black plug on the video cable into the camera’s video output connector.
3
Tune the television to the video channel
4
Turn the camera on
• The television will perform the functions normally performed by the camera
monitor, and the camera monitor will turn off.
Connecting to a Television or VCR
2
Connect the video cable to the video device
• Connect the yellow plug to the video-in jack on the television or VCR.
E4300 (E) 02.12.9 1:47 PM Page 68