Filter
Top Products
133132
Optional Accessories
At the time of writing, the following optional accessories were available
for the COOLPIX4300. Contact your retailer or local Nikon
representative for details.
Note on using remote release cable
The remote cord does not function when the camera is set to Movie,
Continuous or VGA Sequence.
Approved Memory Cards
The following memory cards have been tested and approved for use in the
COOLPIX4300:
• SanDisk SDCFB series 16 MB, 32 MB, 48 MB, 64 MB, 96 MB, and 128 MB
• Lexar Media 4X USB series 8 MB, 16 MB, 32 MB, 48 MB, 64 MB, and 80 MB
• Lexar Media 8X USB series 8 MB, 16 MB, 32 MB, 48 MB, 64 MB, and 80 MB
• Lexar Media 10X USB series 128 MB and 160 MB
Operation is not guaranteed with other makes of memory card. For more details
on the above cards, please contact the manufacturer.
Use Only Nikon Brand Electronic Accessories
Your Nikon COOLPIX digital camera is designed to the highest standards and
includes complex electronic circuitry. Only Nikon brand electronic accessories
(including battery chargers, batteries, and AC adapters) certified by Nikon
specifically for use with your Nikon digital camera are engineered and proven to
operate within the operational and safety requirements of this electronic circuitry.
The use of non-Nikon electronic accessories could damage your camera and
may void your Nikon warranty.
For more information about Nikon brand accessories, contact your local
authorized Nikon dealer.
Technical Notes—Optional Accessories
AC adapters/
battery chargers
Rechargeable battery
Carrying case
CompactFlash memory
card adapter
Lens Adapter
Lens Converter and
Slide copying adapter
(UR-E4 step down ring
lens adapter required)
Remote release cable
Monitor hood
Macro light
• EH-21 AC adapter/battery charger
• EH-53 AC adapter
• MH-53 battery charger
• MH-53C battery charger (plugs into vehicle
cigarette-lighter socket)
EN-EL1 rechargeable Li-ion battery
CS-E885 Soft Case
EC-AD1 PC-card adapter
• UR-E4 step down ring lens adapter
• UR-E7 step down ring lens adapter
• WC-E63 Wideangle converter
• WC-E68 (UR-E4 and UR-E7 required)
• TC-E2 (2x)/TC-E3ED (3x) Telephoto converter
• FC-E8 fisheye lens converter
• ES-E28 slide-copying adapter
MC-EU1 remote cord
HL-E885 LCD Hood
MACRO COOL-LIGHT SL-1 (UR-E4 required)
A Note on Electronically Controlled Cameras
In extremely rare instances, unusual characters may appear in the monitor and
the camera may stop functioning. In most cases, this phenomenon is caused by
a strong external static charge. Turn the camera off, remove and replace the
battery, and turn the camera on again. If you are using an AC adapter,
disconnect and reconnect the adapter, and turn the camera on again. If the
camera continues to malfunction after performing the above operation, contact
retailer or Nikon representative. Note that performing the above operation may
eliminate data not recorded to the CF memory card at the time the camera
stopped functioning. Data already recorded to the CF memory card will not be
affected.
E4300 (E) 02.12.9 1:47 PM Page 132