Filter
Top Products
Basic Photography and Playback: L (Auto) Mode
28
Exposure Compensation
Exposure compensation is used to alter exposure from the value sug-
gested by the camera to make pictures brighter or darker.
1 Press I (exposure compensation).
2 Press the multi selector G or H to
adjust exposure.
• When the picture is too dark: adjust the
exposure compensation to “+” side.
• When the picture is too bright: adjust the
exposure compensation to “-” side.
• The monitor will return to the normal display
for the current mode if the setting is not applied by pressing d within
five seconds.
• Exposure compensation can be set to values between -2.0 and +2.0
EV.
• For information on using the multi selector, see “Multi Selector”
(c 8).
3 Press d.
• At settings other than 0, the I icon and
exposure compensation are shown in the
monitor.
• The exposure compensation applied in L
mode is stored in the camera’s memory even
after the camera is turned off.
Exp. +/-
+1.0+1.0
+1.0
+2.0
-2.0
0
+1.0
5
L
5
+1.0
+1.0
+1.0+1.0