Nikon L11 Digital Camera User Manual


 
Shooting Suited for the Scene - b Scene Mode
37
Taking Pictures in the Face-priority AF
1 Press the multi selector G or H to
choose [Face-priority AF] in the scene
menu and press d.
•The K guide is displayed.
2 Frame a picture using the K guide.
When the camera detects a face, the guide is
displayed with a double yellow border.
When the camera detects more than one
face, the closest face is framed by a double
border and the rest by a single border. The
camera focuses on the face framed by the
double border. If the camera loses its ability to detect a face (for
example, because the subject has looked away from the camera), bor-
ders are no longer displayed and monitor display returns to that
shown in step 1.
3 Press the shutter-release but-
ton halfway.
Focus and exposure are set, and the
double border glows green.
4 Press the shutter-release button the
rest of the way down to take a pic-
ture.
jFace-Priority AF
The camera’s ability to detect faces depends on a variety of factors, including
whether or not the subject is facing the camera.
The camera will focus continuously until a face detected.
If the yellow double border blinks when the shutter-release button is pressed
halfway, the camera was unable to focus. Release the button and try again.
If no face is recognized when the shutter-release button is pressed halfway,
the camera focus is on the center of the frame.
The camera may be unable to detect faces in the following situations;
- When faces are partially hidden by sunglasses or other obstructions
- When faces take up too much or too little of the frame