Filter
Top Products
12
Control buttons
Recalling the underexposure value in the TTL auto
flash mode
Press the a and g buttons simultaneously to recall
the underexposure value (p. 33).
Resetting the settings
Press the a and b buttons simultaneously for
approx. 2 sec. to reset all settings, including the custom
settings (except the distance unit selected in m/ft) to
their default values.
Button lock
Press the b and g buttons simultaneously to lock
the functions of the control buttons (except the b,
Modeling illuminator, and FLASH buttons) to avoid
accidental malfunction. Press the buttons again to
release the lock.
e button/f button
Press to increase or decrease the values of the
highlighted items.
b button
Press for approx. 0.3 sec. to turn the power on
and off.
Multi Selector
g button
•Press to select the items to be set. The selected
item is highlighted and can be changed using
the e and f buttons.
•Press for approx. 2 sec. to display the Custom
settings mode (p. 68).
c button (wide)/d button (tele)
Press to change the zoom-head position (p. 26).
FLASH button
Press to test fire the flash (p. 20).
a button
Press to set the flash mode (p. 30).
Control button quick reference
Procedures for Custom settings, recalling the
underexposure value in the TTL auto flash
mode, resetting all settings to their default
values, and the button lock are shown in the
Control button quick reference chart on the
back of the built-in bounce card.