Filter
Top Products
78
Flash shooting in Advanced Wireless Lighting
■
■
■
Setting the flash mode, flash output level compensation
values, and channel number on the master flash unit.
1
Press the g button on the master flash unit to
highlight “M”, then press the a button to
choose the desired flash mode.
2
Press the e or f button to increase or decrease
the flash output level compensation values.
• Compensation values can be set in 1/3 steps from
–3.0 to +3.0 EV.
• The flash output level can be set from M1/1 to M1/128
in the Manual G mode.
3
Press the g button to highlight “A”, then press
the a button to set the flash mode on the
remote flash unit within group A.
• If the master unit’s flash mode has been set to
Repeating flash, the Repeating flash or Flash
canceled mode can be set on the remote flash unit.
4
Following step 2 above, set the flash output level
compensation values on the remote flash unit
within group A.
5
As in steps 3 and 4, set the flash mode and flash
output level compensation values on the remote
flash units within groups B and C.
6
Press the g button on the master flash unit to
highlight the channel number, then press the e
or f button to set the channel number.