Filter
Top Products
7
Press the g button on the master flash unit to
highlight “B”, then press the a button to set
the flash mode to G on the remote flash
unit B.
8
Likewise, press the f button on the master flash
unit to set the flash output level to 1/16 on the
remote flash unit B.
9
Press the g button on the master flash unit to
highlight the channel number, then press the e
or f button to set the channel number to 1.
10
Set up remote flash units A and B.Turn the power
on, then confirm that the ready-lights
come on.
• Use a tripod or the Speedlight Stand AS-19 for
placement of the remote flash units (p. 75).
11
Set the remote flash units A and B to REMOTE.
12
Set the channel number of the remote flash units
A and B to 1.
• Be sure to choose the same channel number as set
on the master flash unit.
82
Flash shooting in Advanced Wireless Lighting