Filter
Top Products
25
■
■
■
Setting the ISO sensitivity for cameras in Groups III to VII
For cameras in Groups III to VII, set the ISO sensitivity in the Custom settings
mode (p. 67).
1
Turn the SB-800 off once, then turn it back
on. After that, turn on the camera body.
2
Press the g button for approx. 2 sec. to
display the Custom settings mode.
3
Press the e/f button and c/d button
to select “ISO”, then press the g button.
4
Press the e or f button to highlight the
preferred ISO sensitivity.
5
Press the g button for approx. 2 sec. or
press the b button to return to the
normal display.
Basic operation