Filter
Top Products
91
■
■
■
Notes on multiple flash shooting using cords
• Be sure to see the instruction manuals of your cameras, Speedlights, and accessories.
• Refer to “System chart for TTL multiple flash shooting using cords” (p. 94) and your
cameras and Speedlights instruction manuals for proper connection.
• Use the optional TTL Remote Cords SC-27, SC-26, SC-19 or SC-18 to connect the
SB-800 to more than one remote flash unit.
• Use the optional Multi-Flash Adapter AS-10, if the remote flash units are not equipped
with multiple flash terminals.
• Use the optional Multi-Flash Adapter AS-10 to attach the remote flash unit(s) to a tripod.
• Be sure to cancel the master flash unit’s Monitor Preflashes.
• Multiple flash shooting using cords can be performed in two modes: (1) TTL multiple
flash; and (2) Manual multiple flash. Performing multiple flash shooting in the Manual
mode, however, is not recommended, since it is difficult to obtain the correct exposure.
Use the TTL auto flash mode with cameras compatible with TTL auto flash.
• To ensure proper exposure, make test shots before shooting important events.
Advanced operations