Filter
Top Products
76
When the SB-800 is used with Nikon cameras compatible with CLS,
Advanced Wireless Lighting is possible.
In this mode, you can divide the remote flash units into a maximum of three
groups (A, B, C) and set the flash mode and flash output level compensation
values separately for each group as well as the master flash unit, providing
automatic control of the light output.
■
■
■
Setting the SB-800 to Advanced Wireless Lighting
You can set the SB-800 to Advanced Wireless Lighting using Custom settings
(p. 67).
Select “MASTER”to set the SB-800 as the master flash unit in the Custom
settings mode.
• Select “MASTER(RPT) in Repeating flash operation.
• The indicator O appears on the LCD panel.
Select “REMOTE”to set the SB-800 as a remote flash unit in the Custom
settings mode.
• The indicator P appears on the LCD panel.
Flash shooting in Advanced Wireless Lighting