Filter
Top Products
114
Basic Camera Setup: The Setup Menu
Shooting, Playback, and Setup Menus
h Sound Settings
Adjust the following sound settings.
I Record Orientation
Choose whether or not to record the orientation of pictures taken in “tall”
orientation.
Choose [Auto] (default setting) to record the picture’s orientation detected
by the camera’s sensor. The taken picture will be automatically rotated in
playback mode. When [Off] is selected, the picture will be displayed in the
same orientation as it was taken.
Picture orientation information can be modified from the [Rotate image]
option in the playback menu (c 102).
i Auto Off
Choose the time allowed to elapse before the camera enters standby mode
to save power (c 23). The time options are [30s], [1m] (default setting),
[5m], and [30m]. The power-on lamp flashes in standby mode. If no
operations are performed for another three minutes, the camera turns off.
k Notes on Auto Off
Regardless of the option selected, the monitor will remain on for three minutes, when [30s]
or [1m] is selected for [Auto off] and menus are displayed, and 30 minutes, during continuous
playback for slide shows and Pictmotion movies or when the AC adapter is connected.
Button sound
When [On] (default setting) is selected, beep will sound once when operations
are completed successfully, twice when the camera acquires focus on the
subject, and three times when error is detected.
Shutter sound
Turn shutter sound on or off. The default setting is [On].