Filter
Top Products
124
Wireless Services
Wireless LAN Settings for the Camera
To take advantage of my Picturetown using the wireless features, network
settings including a network profile and sender information, must be
configured for the wireless LAN. Refer to the information below for
assistance in configuring settings using the [Wireless settings] option in the
camera’s setup menu or the Utility on a computer.
Network Profile
“Network profile” refers to the network settings configured for connection
via a wireless LAN access point that supports Internet connection. To use my
Picturetown services, configure the following network settings to match
those used by the desired wireless LAN (access point).
Network name (SSID)
Enter the name of the network (up to 32 characters) to which the access point
belongs. If a name is displayed when configuring a network profile using the
Utility, use that name. If more than one name is displayed, choose the desired
network name.
Authentication
Select an authentication method from [Open system], [Shared key], [WPA-
PSK], or [WPA2-PSK] for verifying connection to the desired wireless LAN.
Encryption
Make your wireless LAN connection more secure by encrypting data. The
encryption method(s) available to the camera differ depending upon the
authentication method selected (see below).
Wireless settings
Network profile
Sender
Address options
Picture Bank
Password
The camera’s setup menu my Picturetown Utility
(
mandatory con
f
iguration
)
Authentication method Encryption method(s) available to the camera
[Open system] [None] or [WEP]
[Shared key] [WEP]
[WPA-PSK] [TKIP]
[WPA2-PSK] [AES]