Filter
Top Products
16
First Steps
Charging the Battery
Insert the battery and charge it with the AC Adapter EH-64 (supplied) before
first use or when the battery is running low.
1 Connect the power cable and AC adapter 1.
2 Turn off the camera.
If the power-on lamp (green) is lit, press the power
switch to turn off the camera. You cannot charge
the battery while the camera is turned on.
3 Connect the AC adapter to the camera’s multi connector 2.
The multi connector should be fully inserted.
4 Plug the power cable into an outlet 3.
The AC adapter power-on lamp will light 4.
k Charging the Battery After Setting the Camera’s Clock
When the camera’s built-in clock has not been set, the battery begins charging when
the AC adapter is connected. Once the clock is set, Picture Bank (c 144) will start when
the AC adapter is connected, and the camera will attempt to upload pictures to the my
Picturetown server. Press d to cancel picture upload and charge the battery. Picture
Bank can be set so that it does not start automatically when the AC adapter is
connected (c 145).
5 The battery begins charging.
The power-on lamp net to the power switch will blink
orange as the battery charges. If the lamp flickers
rapidly, the AC adapter is not correctly inserted or the
battery is faulty. Reinsert the AC adapter or replace
the battery.
A fully exhausted battery will recharge in about two hours.
1
24
3